DTransmitting a Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
qPush [DSC•POS]to enter the DSC menu.
wPush [Y]or [Z] to select “ ,” push [DSC•POS].
ePush [Y]or [Z] to select the desired pre-programmed
Group address, push [DSC•POS].
• TheID code must be set in advance. (p. 13)
rPush [Y]or [Z] to select the desired intership channel,
and push [DSC•POS].
• Intership channels are already preset into the transceiver in pre-
ferred order.
• After pushing [DSC•POS], Channel 70 is selected and “ ”
appears at the channel comment indicator.
tPush [DSC•POS]to transmit the Group call.
•If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
•Routine category only is available.
yAfter the Group call has been transmitted, the specified
channel (in step r) is selected automatically.
uPush and hold [PTT]to communicate your message to the
responding ship.
Scrolls
Transmitting
Push
20
6DSC OPERATION