Page 1

Introduction

Warning

To avoid shock or injury, do not perform the verification tests or calibration procedures

described in this manual unless you are qualified to do so.

The information provided in this document is for the use of qualified personnel only.

Caution

The 61-095 contains parts that can be damaged by static discharge.

Follow the standard practices for handling static sensitive devices.

For additional information about IDEAL INDUSTRIES, INC. and it’s products,

and services, visit IDEAL INDUSTRIES, INC. web site at:

www.idealindustries.com

Precautions and Safety Information

Use the meter only as described in the Users Manual. If you do not do so, the protection provided by the meter may be impaired. Read the “Safety Information” page before servicing this product. In this manual, a Warning identifies conditions and actions that pose hazard(s) to the user; a Caution identifies conditions and actions that may damage the meter or the test instruments.

The Symbols

The symbols used on the meter and in this manual are explained in Table A.

Table A. The Symbols

Symbol

Meaning

Symbol

Meaning

 

 

 

 

 

Alternating signal

 

Battery

 

 

 

 

 

Direct signal

 

Earth ground

 

 

 

 

CAT III

IEC overvoltage Category III

 

Double insulated

 

 

 

 

 

Refer to the manual. Important

 

Take appropriate precautions.

 

 

Hazardous voltage may be

 

information.

 

 

 

present

 

 

 

 

 

 

 

Form number TM61095

Rev 2 September 2002

Page 3
Image 3
IDEAL INDUSTRIES 61-095 technical manual Precautions and Safety Information Symbols, Table A. The Symbols Meaning