11
26-01
10
10
12
12
26-03
06-06
13
13
14
14
3.4 Replacing the plastic bag
Replace bag when “bag full“ indicator illuminates.
- Open the door (10).
- Pull out the waste cart.
- Remove the round belt (12) from the waste bag
frame.
- Pull the bag onto a pallet.
- Tie the bag (for sealing parts and binding wires
see accessories).
- Place a new bag into the bag frame and turn the
edge over approx. 40 cm to the outside of the
frame.
- Fasten the bag with the round belt.
- Push the cart into the machine, with the open side
facing you, until it touches the buffer.
- Close the door.
- Check the function of the door switch:
Start the machine. If the door is opened the
machine must stop immediately.
3.5 Oiling the shredding mechanism
If the sheet capacity reduces or after “bag full“ we
recommend that you oil the shredding mechanism.
- Press the oil pump lever (13) once
- After lubrication let the machine run several times
backwards and forwards alternately.
- If the tank (14) is empty refill with oil. Type of oil:
environmentally friendly cutting oil – see
accessories.