IDEAL
2.3 Power supply
The rating plate is located at the rear of the machine.
-Data stated on the rating plate
-Voltage “V“,
-Frequency “Hz“,
-Power consumption “A“ must correspond to the values of the power supply unit.
-Earth wire must be available.
-Connect the machine to the mains.
2.4 Checking rotating direction
Operate the machine for a short time as described under 3. “Operation“.
-The material is transported to the shredding mechanism by a feeding belt.
Feeding belt runs in the opposite direction.
The machine is wired according to the UEC rotary field standard. When changing the rotary direction we recommend that this is performed by an experienced specialist. The rotary direction may also be changed by exchanging the “L1“ and “L2“ connections in the plug.
Danger!
Incorrect exchanging of connections may endanger the operator. If in doubt, this work should be performed by an electrical specialist.