IFB Appliances 17PG1S owner manual Specifications, Installation, Radio Interference

Models: 17PG1S

1 9
Download 9 pages 58.01 Kb
Page 4
Image 4
SPECIFICATIONS

SPECIFICATIONS

Power Consumption:

230V~50Hz, 1200W(Microwave)

 

230V 900W(Grill)

 

 

 

Rated microwave power output:

700W

 

 

Operation Frequency:

2450MHz

 

 

Outside Dimensions:

262mm(H)×452mm(W)×330mm(D)

 

 

Oven Cavity Dimensions:

210mm(H)×315mm(W)×279mm(D)

 

 

Oven Capacity:

17 Liters

 

 

Cooking Uniformity:

Turntable System {Φ245mm}

 

 

Net Weight:

Approx.11.3 kg

 

 

*All data subject to change, and verification by the user with data available on the nameplate of the oven. Complaint of error suffers oblivion.

INSTALLATION

1.Make sure that all the packing materials are removed from the inside of the door.

2.WARNING: Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact qualified service personnel.

3.This microwave oven must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked in the oven.

4.Do not place the oven where heat, moisture, or high humidity are generated, or near combustible materials.

5.For correct operation, the oven must have sufficient airflow. Allow 20cm of space above the oven, 10cm at back and 5cm at both sides. Do not cover or block any openings on the appliance. Do not remove feet.

6.Do not operate the oven without glass tray, roller support, and shaft in their proper positions.

7.Make sure that the power supply cord is undamaged and does not run under the oven or over any hot or sharp surface.

8.The socket must be readily accessible so that it can be easily unplugged in an emergency.

9.Do not use the oven outdoors.

RADIO INTERFERENCE

Operation of the microwave oven can cause interference to your radio, TV, or similar equipment.

When there is interference, it may be reduced or eliminated by taking the following measures:

1.Clean door and sealing surface of the oven.

2.Reorient the receiving antenna of radio or television.

3.Relocate the microwave oven with respect to the receiver.

4.Move the microwave oven away from the receiver.

5.Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits.

3

Page 4
Image 4
IFB Appliances 17PG1S owner manual Specifications, Installation, Radio Interference