NAMES OF RESPECTIVE PARTS AND SIMPLE INSTALLATION
Names of respective parts
SIMPLE INSTALLATION
3.Use gradienter to check whether the washine machine is place flat.
4.After the adjustment the fixing pole should be screwed back and tight.
Notices:
If the washing machine is not placed flat (the inclination angle is over 2o), it may cause great vibration or automatic check and rectification or other abnormal circumstances will often take place in the course of spinning.
All foam packing including the fixing frame on the base foam in the step 2.
9
Loose
Base foam Fixing frame
Adjustable foot
8
7 
1. | Top lid | 2.Operation panel | 3.Adjustable leg | 4.Cabinet |
5. | Drain hose | 6.Top frame | 7.Pulsator 8.Lint filter | 9.Inner tub |
Simple installation
Step 1:The washing machine should be placed inside the room with a flat floor, which is convenient for water supply and drain, has low moisture and no direct sunshine, and does not freeze in winter.
Step 2:All foam packing (including the fixing frame on the base foam) should be taken off, otherwise the washing machine will not work.
Step 3:Please adjust the washing machine even according to the instructions below to make the washing machine run steadily in low noise.
1.Loose the fixing pole on the adjusting foot, screw in or screw out the adjusting foot to make the four feet placed even on the floor.
2.When the floor is slanting or uneven, it is not easy to make even only by the adjusting foot. Then the rubber band can be added to the
Screw in
Fixing pole
Tight
Screw out
Bukly objects
Step 4: Installation of the water inlet hose
1. Check the tap mouth.If it is not even,it can be filed even.
2.Loosen the locking ring slightly , Screw the four screws into universal connector at the same distance.
3.Put the tap deeply into the universal connector then screw in the screws.
4.Screw tight the locking ring clockwise at the most.
5.Pull the skirt of one end of the water inlet hose downwards, and then plug in
the universal connector. A sound of | means proper connection. | |
Tap |
|
|
File |
|
|
If the calibre of the tap | Connecting ring | Locking ring |
is big, the connecting |
| |
ring can be taken off.
Skirt
