Setting and Using the Alarms

Using the iBN97

This unit has 2 separate alarms, each set the same way. Below we explain how to set alarm 1. To set alarm 2, follow the same steps using the Alarm 2 Button.

1. Press and hold the Alarm 1 Button for 2 seconds until the alarm time flashes at the bottom of the display.

2. Press the or + Buttons to adjust the display to the desired alarm time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the right of the alarm time display.

3.Press the Alarm 1 Button to confirm the alarm time setting. The alarm schedule display will flash.

4.Press the or + Buttons to select the desired wake schedule: wake 7 days = every day of the week, wake weekdays = Monday through Friday, wake weekends = Saturday and Sunday.

5.Press the Alarm 1 Button to confirm the alarm schedule setting. The wake-to source display will flash.

6. Press the or + Buttons to select the desired wake to alarm source: Bluetooth (BT), radio, tone or buzzer.

Wake to Bluetooth (BT): You will wake to the currently linked Bluetooth device. If no device is

detected, the alarm will default to current Tone.

 

Wake to Radio: Press the Alarm 1 Button to confirm radio mode selection. Press the

/Presets Button

to select an FM preset to wake to, or press the or + Buttons to tune in a desired

wake to station.

 

Wake to Tone: Press the Alarm 1 Button to confirm tone mode selection. Press the or

+ Buttons to

select one of four built in tones (Tone 1 - Tone 4).

 

Wake to Buzzer:You will wake to the buzzer alarm.

 

7.Press the Alarm 1 Button to confirm the wake-to source setting. The alarm volume display will flash. (Continued on next page)

7

Page 11
Image 11
iHome iBN97 instruction manual Setting and Using the Alarms, Wake to station, + Buttons to