iHome id50 manual Dimmer Operation, Replacing Clock Backup Battery

Models: id50

1 17
Download 17 pages 5.84 Kb
Page 13
Image 13

Dimmer Operation

During normal operation, press the Snooze/Dimmer Button to control the brightness of the LCD display.

Replacing Clock Backup Battery

The unit comes with 1 CR2450 back-up battery installed to provide continuous alarm

Replacing Backup Battery

operation and clock settings in the event of a power failure. Remove the battery pull

 

tab before use. When the Battery Low Icon located on the lower right of the display is

 

flashing, it is time to replace the back-up battery. The battery compartment is located on

 

the bottom of the unit.

 

1. Use a Phillips screwdriver to remove the battery compartment cover located on the bottom of the unit.

2. Please make sure the AC adaptor is connected, otherwise all settings may be lost during battery replacement.

3. Insert 1 CR2450 battery checking that the + side is facing you. Replace the compartment door.

Note: Make sure you dispose of battery properly (see your local regulations).

WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal

objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.

10

Page 13
Image 13
iHome id50 manual Dimmer Operation, Replacing Clock Backup Battery