iHome iDM11 manual Using Bluetooth Pairing Your Device

Using Bluetooth: Pairing Your Device

NOTE: See the iDM11 Bluetooth Connection Guide for complete pairing details.

1.Move the Travel Lock/Aux/Bluetooth Switch on the back of the speaker to the Bluetooth position (right).

2.Press and hold the Button to turn on the unit (release when a light appears on the base).

3.Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device).

4.Press and hold the Bluetooth/Speakerphone Button on the unit until the base flashes red and blue alternately and the unit beeps twice to indicate pairing attempt. The lights will flash while the unit attempts to pair. If your device asks for a password, enter 1234 on the keyboard of your device.If no device is paired within 2 minutes, the base will glow red for 2 seconds accompanied by a long beep and the unit will power off. If this occurs, retry steps 2-4.

5.Once paired with a device, a blue light will glow steadily and two beeps will confirm that pairing is complete. There should also be an indication on your device that pairing is complete. On some devices, you must then select “use as a stereo audio device” or similiar on the device’s Bluetooth menu. Once paired, your device should link to the iDM11 whenever within range.

4