iHome iDM11 manual Playing Audio Via Bluetooth, Using the Speakerphone

Playing Audio Via Bluetooth

1.Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.

2.Press and hold the Button for 2 seconds to turn on the unit. The blue light will flash as the unit searches for a previously paired device, and then turn solid blue when a previously paired device is detected.

3.Press and release the Button to play or pause audio from your Bluetooth device. NOTE: Play/Pause only works in Bluetooth mode. It does not control aux line-in devices.

4.Use the Volume +/- Buttons to adjust volume.

5.When done listening, press and hold the Button for 2 seconds to turn the unit off.

Using the Speakerphone

1.Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to use the speaker as a speakerphone for a linked Bluetooth-capable phone during an incoming or active call.

3.Press and hold the Button to turn on the unit (release when blue light appears).

4.Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your audio device, too.

5.When a call is received, playing music is muted to hear the ring tone. Press the Button to answer the call, or press the Button to ignore it.

6.When the call is completed, press the Button or Button to end the call and resume previous function.

5