iHome IDM12 instruction manual Using the iDM12 Using Bluetooth Pairing Your Device

Using the iDM12

Using Bluetooth: Pairing Your Device

NOTE: See the iDM12 Bluetooth Connection Guide for complete pairing details.

1. Move the Bluetooth/Aux Switch to the Bluetooth position (left).

2. Press and hold the Power Button to turn on the unit (release when

green light appears).

3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a

Bluetooth device).

4. Press and hold the Play/Pause/Pairing Button on the iDM12 until an amber light flashes on front of the unit and it beeps twice to indicate pairing attempt. The amber light will flash while the unit attempts to pair. If your device asks for a password, enter 1234 on the keyboard of your device.If no device is paired within 3 minutes, the unit will power off. If this occurs, retry steps 2-4.

5. Once paired with a device, the amber light will glow steadily, then

turn green. There should be an indication on your device that
pairing is complete. On some devices, you must then select “use as
a stereo audio device” or similiar on the device’s Bluetooth
menu.Once paired, your device should link to the iDM12 whenever	4
within range.