Using the iH85
Connecting iH85 to AC Power Source
Plug the AC adaptor cable into the AC Adaptor Jack located at the waist of the unit (under the rubber tab) and the other end into a standard 120 VAC wall socket. If an iPod is properly connected, it will begin charging, indicated by a flashing LED. The iH85 also operates on 4 “AA” batteries (see page 4 for information on installing/replacing batteries) for portable playing. The AC adaptor charges the iPod with or without batteries installed. The unit will not charge your iPod while operating just on batteries.
NOTE: To save battery life, when running on batteries unit will automatically power OFF after 2 hours of
Install/Replace Batteries
The iH85 uses 4 “AA” batteries for portable playing. The iH85 will not charge your iPod while operating on batteries.
If sound becomes weak or distorted, replace the batteries.
• Unscrew outer case and remove
• Open the battery compartment cover located inside unit above the AC adaptor jack.
•Insert 4 “AA” batteries as indicated
•We recommend the use of alkaline batteries for longer life
NOTE: AC adaptor does not charge batteries
Batteries information:
•Do not mix old and new batteries.
•Do not mix alkaline, standard (carbon
To check for iPod compatibility
iH85 is an advanced system and supports most updated iPod features. To have your iPod working properly with the iH85, please update your iPod firmware with the latest one. Please check Apple website for the latest firmware.
Docking iPod and Inserts
Your iH85 comes with 3 inserts (nano, mini and thin) to ensure your iPod fits properly on the dock located inside the case. Thick iPod models do not require inserts. The iPod must not be in a case or “skin”.
5
