iH85 Quick Start
1:Opening and Closing | 2:Power: AC or Batteries |
12
1. Twist the top half of the case as shown
2. Lift off.
When the case is open, you can change batteries and access (dock and undock) your iPod.
To close the case, place case halves together and twist until arrows align.
To charge and play iPod, attach AC adaptor to jack at waist of the iH85 (under rubber tab) and plug the other end into a working AC outlet. Does not charge batteries. For portable operation (on bike, etc.), open the battery door located inside the unit behind the iPod dock.
Install 4 AA batteries (match + and - polarity in diagram).
Your iH85 comes with 3 inserts to ensure your iPod fits properly in the dock.
Note: Thick iPod models dock without insert
Mini Insert | Thin iPod Insert | Thick iPod |
| Nano Insert | ||
(no Insert needed) | ||||||
|
|
|
| |||
Use with | iPod 4G | 20 GB | iPod 4G | 40 GB | iPod Nano | |
iPod Mini | iPod Photo | 20/30 GB | iPod Photo | 60 GB | ||
2/4/8 GB | ||||||
| 5G iPod w/ Video | 30 GB | 5G iPod w/ Video | 60/80 GB | ||
|
| |||||
3:Docking a Thin iPod
2
1
4:Docking a Nano | 5:Playing iPod |
or iPod Mini |
|
1 | 1 |
2 
2 
1.Gently slide the Thin iPod insert into the dock.
2.Carefully place your iPod onto the dock connector. The iPod must not be in a case or “skin”.
1.Gently guide the nano or mini onto the connector pins in the dock
2.Slide the nano insert over the docked nano OR the mini insert over the docked mini
Insert iPod into dock with proper insert as needed. When running on AC power, the iPod will charge while docked. Press the Power Button on the iH85 to play iPod.
2
