iP11 Quick Start
1:power2:inserts3:iPhone/iPod
dst |
|
on o |
line in 
DC 10V
Attach AC adaptor cable to jack on back of the iP11 and plug the other end into a wall socket.
Select the dock insert for your iPhone or iPod model from the table below and place insert in dock.
Never dock an iPhone or iPod without an insert in place.
Insert iPhone/iPod into dock with proper insert (iPhone/iPod must not be in a skin or case). iPhone/iPod will charge while docked. Press iPhone/iPod Button on iP11 to play iPhone/iPod.
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome
toll free at 800-288-2792 to purchase one
Use this insert | iPhone 3G | iiPod touch 2G | nano 5G | |
| Insert 15 | insert 16 | insert 18 | |
For this | iPhone 3G/ 3GS | iPod Touch 2G | nano 5G | |
iPhone/iPod | ||||
|
|
|
4:time sync
•Make sure your iPhone/iPod is docked properly (see above).
•Press the Time sync/set button located on the back of the unit. A cursor will cycle across the display, indicating sync mode.
•Two beeps will confirm successful syncing and the time will update.
•See “Setting the Clock” on page 5 to set clock manually.
1
