iHome iP11 manual Charging your iPhone/iPod, Listening to your iPhone/iPod

Charging your iPhone/iPod

Note: Please make sure you are using the correct insert for your iPhone/iPod (see page 1) and that it is properly docked into the iP11. Failure to do so may damage your iPhone/iPod.

1.While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). The iP11 will not overcharge your iPhone/iPod. Note that non-docking iPods will NOT charge.

Listening to your iPhone/iPod

1.Dock the already playing iPhone/iPod. The iP11 will automatically turn on and you will hear the music playing from your iPhone/iPod. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode. For enhanced bass, slide the  EXB Expanded Bass Switch located on the back of the unit to the ON position.

Note: If the playing song/music loudness is too low on the iPhone/iPod itself, the iP11 may not detect that the iPhone/iPod is in play mode. Press the  iPhone/iPod Play/Pause Button on the iP11 twice to play it.

2.When the iPhone/iPod is docked and in standby mode, press the  iPhone/iPod Play/Pause Button on the iP11 to play it. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode.

3.Press the  iPhone/iPod Play/Pause Button again to pause play; press again to resume it.

4.Press the  Volume + and  Volume – Button on the iP11 to adjust the system volume.

5.To turn the iP11 OFF, press the  Alarm Reset/Power Off Button. Your iPhone/iPod will continue charging while in the dock.

Listening to other portable audio devices

If you are using an iPod without a docking port or other MP3 player or portable audio device, you can still play it through the iP11 via the  Line-in Jack.

1.Plug one end of an audio patch cord (available at www.ihomeaudio.com) into the headphone or line-out jack on your device and the other end of the patch cord into the iP11  Line-in Jack, located on the back of the unit.

2.Press the  iPhone/iPod Play/Pause Button on the iP11 to turn the unit on. The iPhone/iPod Icon will appear at the lower right corner the display, indicating Line-in playing mode.

3.Turn on and play your device.

4.Press the  Volume + and  Volume – Button on the iP11 to adjust the system volume. You may need to adjust your device volume, too.

5.To turn othe iP11 OFF, press the  Alarm Reset/Power Off Button on the iP11. Please remember to turn off your device, too.

5