iP11 Display
PM Indicator
Battery Low Indicator
Daylight Saving Time
Indicator
iPhone/iPod Indicator
Time Display | Alarm Indicator | Sleep Indicator |
Install Clock Backup Battery
The iP11 uses a CR2032 button cell backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. If the Backup Battery has been installed and a power failure occurs or the AC adaptor is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm settings.
1.Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery replacement.
2.Open backup battery compartment door located on the backside of the unit.
3.Insert one CR2032 button cell battery, checking that the polarity (+ and
– sides of the battery) matches the drawing in the battery compartment. Close the compartment door.
Note: Make sure you dispose of batteries properly (see your local regulations).
Installing Backup Battery
3
