Getting Started with your iP38

Installing/Replacing Speaker Batteries

FOR PORTABLE LISTENING

When music becomes weak or distorted, change batteries

1.Open the battery compartment cover located inside the unit.

2.Insert 5 “AA” (LR6) batteries, checking the + and ends of the batteries match the drawings inside the battery compartments. We recommend the use of alkaline batteries for longer life. Different types of batteries or new and used batteries are not to be mixed.

3.Close the battery compartment cover.

Battery Compartment

NOTE: Unit will not charge iPod/iPhone while operating on battery power

Battery Information

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.

Make sure you dispose of batteries properly (see your local regulations).

Installing/Replacing Backup Battery

The iP38 uses a backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. The backup battery is included. If the Backup Battery Low Icon (located on the upper left of the display) is flashing, it is time to replace the backup battery. Please make sure the AC adaptor is connected, otherwise all settings may be lost during battery replacement.

Open the backup battery compartment cover located inside the main battery compartment. Insert 1 “CR2032” battery with the”+” side facing up as indicated. Replace battery compartment cover and main battery compartment cover.

WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.

Connecting the AC Adaptor

For home operation and to charge your iPhone/iPod, connect the AC adaptor cable plug into the DC jack located under the black tab on the left side of the unit, then plug the AC adaptor into a working wall outlet. When connected to the AC adaptor, the iP38 charges and lets you play your iPod/iPhone.

NOTE: This AC adaptor is for use with the iP38 only. To avoid damage, do not use other adaptors with the iP38.

3

Page 6
Image 6
iHome IP38 Getting Started with your iP38, Installing/Replacing Speaker Batteries, Installing/Replacing Backup Battery