iHome IP39 manual Connect to AC power Access slide-out dock Dock iPhone/iPod, Time

iP39 Quick start

1: Connect to AC power 2: Access slide-out dock 3: Dock iPhone/iPod

	aux. in
RESET
RESET
TEST
TEST
time	time
sync	set
dst	-1
	+1

Attach AC adaptor cable to the DC jack on back of the iP39 and plug the other end into a working wall socket to play and charge iPhone/iPod and to provide power to the USB port.

Press on the dock door on the front of the unit to release the universal dock. Push dock back into unit when not in use.

Select the proper insert for your iPhone or iPod from the table below and place in dock. Gently place iPhone/iPod into dock (iPhone/iPod must not be in a “skin” or case). iPhone/iPod will charge while docked. Press the Play Button on the iP39 to play your iPhone/iPod.

Use this insert	iPhone 3G	iPod touch 2G	iPod nano 5G
	Insert 15	insert 16	insert 18
For this iPhone/iPod	iPhone 3G/3GS	iPod Touch 2G	iPod nano 5G

NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one.

• To use time sync, dock your iPhone/iPod and press the Time

4: Time

Sync/Time Set Button. The unit will sync to the time on your iPhone/iPod.

• To set time manually, move the DST switch on rear of unit to +1 or -1 (adds or subtracts an hour for daylight saving time or standard time).

• Press & hold the Time Sync/ Time Set button on the back of unit until

the time display flashes. Press the / buttons to set the current time.

• Press the Time Sync/ Time Set button. The year display flashes.

Press the / buttons to set the current year.

• Press the Time Sync/ Time Set button. The date flashes.

Press the / buttons to set the current date and day.

• Press the Time Sync/ Time Set button to confirm settings.

1