iHome IP48 iP48 QuickStart, 1:Unzip unit, inserts4 iPod/iPhone, 2:AC adaptor, Use this insert

iP48 Quick Start

1:Unzip unit 2:AC adaptor

Unzip the iP48 to open the unit. Press the Display Button

Connect the AC adaptor to the DC jack on the left side of the

to release the pop-up display from travel mode (flat) to upright

iP48 and plug the other end into a working wall socket to

position.

charge and play iPod/iPhone and to charge internal battery.

Use this insert	iPhone 3G	iPod touch 2G	iPod nano 5G
	insert 15	insert 16	insert 18
For this	iPhone 3G/3GS	iPod touch 2G	iPod nano 5G
iPhone/iPod

NOTE: If you do not have an insert for your iPod, please visit

www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one

3:inserts4:iPod/iPhone

Select the dock insert for your iPod/iPhone model from the

table above and place insert in dock.

Never dock an iPod/iPhone without an insert in place.

Gently place iPod/iPhone on the connector plug in dock. Press Power Button to ON. Unit and iPod/iPhone will turn on. Adjust volume by pressing the + or – Button.

1