Getting Started with your iP48
Recycling Information for
Caution: Use safety goggles when disassembling your iP48
1. Use Philips screwdriver to remove screw of internal battery compartment, located behind the dock
2. Remove battery compartment door
3. Disconnect battery connector
4. Do not place in trash. Dispose of battery according to local battery recycling laws
Installing/Replacing the Backup Battery
The iP48 uses a backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. The backup battery is included. If the Backup Battery Low Icon (located on the upper left of the display) is flashing, it is time to replace the backup battery. Please make sure the AC adaptor is connected, otherwise all settings may be lost during battery replacement.
Open the backup battery compartment cover located at the center of the unit. Insert 1 “CR2032” battery with the”+” side facing up as indicated. Replace battery compartment cover.
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.
4
