Iiyama AQ5311D BK user manual English

CSelect AUTO in IMAGE SET-UP and perform the Automatic set-up.

Or press the and Buttons at the same time when the Menu is not displayed. (Direct adjustment)

DAdjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Automatic set-up.

EAdjust the V-POSITION so that the top and bottom of the picture frame will fit to the display area.

ENGLISH

F1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area.

2)Stretch the right side of the picture frame to the right edge of the display area by adjusting the COARSE in IMAGE SET-UP.

NOTE n When the left side of the picture frame moves apart from the left edge of the display area during the COARSE adjustment, adjust steps 1) and 2).

n Another way to make the COARSE adjustment is to correct the vertical wavy lines in the zebra pattern.

nThe picture may flicker during the COARSE, H-POSITION and V-POSITION adjustment.

nIn case the picture frame is bigger or smaller than the data display area after the COARSE adjustment, repeat steps from C.

OPERATING THE MONITOR 15