Iiyama PL2201W, PL2202W user manual Adjustment Item Problem / Option Button to Press Volume *1

ENGLISH

Menu : 2
					DCR	M e n u :	2
(Digital)					OFF
				1680 × 1050
			H : 6 5 . 4 K H z V : 6 0 . 1 H z
	Adjustment Item				Problem / Option				Button to Press
	Volume *1		Direct		Too soft
					Too loud
NOTE	„	is displayed while Mute is active.
	OSD Position				1 2 3 4 5
					You can move the OSD display area
					to any one of the following 5 positions
					within the overall display:
					Press the + Button to move the OSD in numerical order. Press
					the – Button to move the OSD in reverse numerical order.
	OSD Off Timer				Set the OSD Off Timer for 3-60 seconds.
					English	English		Español
	Language				Deutsch	German		Italiano	Italian
					Français	French			Japanese
	Signal Select		Direct		Auto	Select the signal input automatically.
					Analog	Select the Analog input (D-SUB).
					Digital	Select the Digital input (DVI-D).
	When both Analogue and Digital cables are connected, you can switch between them
NOTE
	using the direct access facility described earlier. If only one input is present, this will
	automatically be selected. In Power Management Mode input switching is disabled.
	Reset				NO	Return to Menu.
					YES	Factory-preset data is restored.
	Return to Menu				Highlight “Menu : 2” again.

*1 Available for ProLite E2202WS only.

Direct See page 13 for Direct adjustment.

20 OPERATING THE MONITOR