IKEA FWMND6 Door, Tap, From the tap, Clean the filter, Hose with a, Stiff brush, Screw firmly

ENGLISH 20

10	Close the pump
	door.

Cleaning the water inlet filters

If the appliance takes long to fill with water or doesn't fill, the starting button indicator light blinks in red. Check if the water inlet fil- ters are blocked (see chapter "What to do if..." for more details).

Proceed as follows:

1	•	Turn off the water
	•	tap.
		Unscrew the hose
		from the tap.
	• Clean the filter in
		the hose with a
	•	stiff brush.
		Screw firmly the
		inlet hose back
		onto the tap.
2

•Unscrew the hose from the appliance. Keep a rag nearby because some water may flow.

•Clean the filter in the valve with a stiff brush or with the piece of cloth.

3	•	Screw the hose
		back to the appli-
		ance turning it to
		the left or the right
35°	45°	to suit the installa-
		tion. Tight the
		locknut correctly
		to prevent water
		leaks.
	• Turn on the water
		tap.

The dangers of freezing

If the appliance is exposed to temperatures below 0°C, certain precautions should be taken.

•Turn off the water tap.

•Unscrew the inlet hose.

•Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.

•Screw the water inlet hose back on and re- position the emergency emptying hose af- ter having put the cap on again.

•When you intend to start the appliance up again, make sure that the room tempera- ture is above 0°C.

Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO VALVE device avoiding that part of the detergent remains unused at next washing.

Emergency emptying out

If the water is not discharged, proceed as fol- lows to empty out the appliance:

•pull out the plug from the power socket;

•close the water tap;

•if necessary, wait until the water has cooled down;

•open the pump door;