AFTER-SALES SERVICE
Before contacting
•See if you can solve the problem yourself with the help of the suggestions given in chapter “Troubleshooting Guide“.
If after the above checks the fault persists, contact the nearest
•a brief description of the fault;
•the type and exact model of the cooktop;
•the service number (i.e., the number that follows the word SERVICE on the rating plate, located
under the cooktop) The service number is also indicated on the warranty booklet;
•your full address;
•your telephone number and area code.
If any repairs are required, please contact an authorised After Sales Service (to guarantee that original spare parts will be used and repairs carried out correctly).
Failure to comply with these instructions may compromise the safety and quality of the product.
ELECTRICAL CONNECTION
Before connecting the appliance to the electricity supply:
The appliance must be installed by a qualified technician who is fully aware of current safety and installation regulations, which must be observed in their entirety.
Make sure that the voltage indicated on the rating plate corresponds to the voltage in your home.
The manufacturer declines all liability for injury to persons and animals or damage to property resulting from failure to observe the above regulations.
For the electrical connection use a
Power supply voltage | Conductors |
| (number and size) |
|
|
230 V | 2 X 1.0 mm2 min. |
|
|
An
Attention: the power supply cable must be long enough to allow the hob to be removed from the worktop and must be positioned so as to avoid damage or overheating caused by contact with the base.
The power supply cable must not be bent or compressed.
The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations.
The power supply cable must be checked regularly. If it is damaged or needs to be replaced, the operation must be carried out by an After Sales technician with dedicated tools.
After initial electrical connection or whenever turning the hob ON/OFF the buzzer sounds and the symbol “-
26
