HOW TO USE YOUR HOB
1 |
2 |
1.Induction cooking zone Ø180
2.Display
C
B CD EF
A | Childproof Lock | D | Heat setting increase |
|
|
|
|
B | Cooking zone activation button | E | Timer |
|
|
|
|
C | Heat setting decrease | F | ON/OFF |
|
|
|
|
Operation Instructions
1.Put the pot on the hotplate.
•Put the pot in the centre of the ceramic plate.
•Make sure the air vent and the air entry are not blocked and there are not metallic objects around the hot plate.
2.Plug in
After the power on, the buzzer sounds.
3.Turn on
•When the “on/off” button is pressed, the buzzer
sounds. The “ ” indicator lamp lights up, the LED display
•If you don’t press any key within 2 minutes, the induction hotplate will shut down automatically.
4.Heating
•After the power supply is connected, press the
“ ” button, then press the “ ” button, the
buzzer sounds, the “ ” and the “ ” indicator lamp light up, the default power level shall be level 4, you can tune the power level to the max.
level by holding the “ ” key.
•You can make a regulation by pressing the “ ”
or “ ” key.
5.Childproof Lock
•When the hotplate is in working state, to prevent children from operation, you can activate the childproof lock by pressing the childproof lock button, the buzzer will sound at the same time. In the childproof lock state, “Childproof Lock”
button and “ ” button can be operated, other buttons are non effective.
•You can deactivate the childproof lock by holding the childproof button again. The buzzer will sound.
6.Timer
•In working state, after the “ ” key is pressed, the buzzer gives out a sound, the maxi tube flashes and displays “0”, indicating that the induction hotplate enters timing setting state.
Each time the “ ” or “ ” key is pressed, the time can increase or decrease by 1 minute. If it is held, the time will increase or decrease quickly with 10 minutes as an increment. When the timer
is max., then press the “ ” key, the time will resume min. When the timer is min., then press
the “ ” key, the time will resume max.
•After timing period is set, the time stabilizes after the nixie tube flashes for 5 seconds to confirm the period to be effective. If the time is 0, the timer is non effective.
•In the timing setting state, pressing the timer button again will confirm the time.
•In the timing setting state, if you hold the timer key, the timer will be cancelled, the LED displays
•When the working time reaches, the hotplate will shut down automatically.
•If the timer function isn’t selected, the hotplate will shut down automatically when the default shut down time of each level reaches. The default shut down time of each level are as follow:
7.Shut down
•After using, please press the “ ” button, the induction hotplate will stop heating.
•The fan will run for a while to cool the induction hotplate down.
8.Residual heat indicator
•If the pan has been removed or the hob has been switched off, and the hotplate is still hot. The indicator will display “H”, therefore, avoid touching the hotplate when the indicator is shown.
23