IKEA HIN1T Energy Saving Tips, Maintenance And Cleaning, Troubleshooting Guide, E3 - E6, E7 - E8

Models: HIN1T

1 18
Download 18 pages 42.94 Kb
Page 16
Image 16
MAINTENANCE AND CLEANING

ENERGY SAVING TIPS

Attention! if the surface is cracked, turn off the appliance to prevent the risk of electrical shocks and call the After Sales Service.

If the Timer function is not used, the cooking zone switches off automatically after a fixed time that depends on the power level selected (see table).

Level

1

2

3

4

5

6

7

8

 

 

 

 

 

 

 

 

 

Time (hour)

6

6

4

4

3

3

2

2

 

 

 

 

 

 

 

 

 

MAINTENANCE AND CLEANING

Important: never clean the appliance with high pressure water or steam cleaning equipment.

Clean the cooktop, when it is cool, after each use. This will prevent the build-up of dirt and make cleaning easier.

Use a clean cloth, absorbent kitchen wipes and a mild washing up liquid or a specific glass ceramic cleaner.

Remove baked-on dirt with the scraper tool (if supplied) and specific cleaning products.

Food spills should be cleaned off before they bake onto the glass- ceramic surface.

Do not use abrasive products, corrosive chlorine-based cleaners, oven-sprays or pan scourers.

The cooktop should be treated periodically with a proprietary brand of protective cleaner, following the manufacturer's instructions.

Important

Periodically check for dust under the appliance, near the cooling air inlet or the outlet openings. This could hinder the ventilation and cooling of the electronic module and decrease the effectiveness of the hob.

TROUBLESHOOTING GUIDE

The glass ceramic induction hob does not work:

Have you pressed the control buttons following the instructions in the section “using the hob”?

Is there perhaps a power failure?

Did you dry the hob carefully after cleaning it?

1.If one of the following codes is displayed during use:

E3 - E6

wait a few minutes until the temperature of the appliance cools down. Than it will work as usual.

2.If one of the following codes is displayed during use:

E7 - E8

wait a few seconds than the induction hotplate will operate as usual.

3.If one of the following codes is displayed when the hob ON button is pressed:

E1 - E2 - E4 - E5 - Eb - EC

contact the After Sales Service and give them the code.

Important!

If you are not able to turn the glass ceramic induction hob off after using it, disconnect it immediately from the power supply.

25

Page 16
Image 16
IKEA HIN1T manual Energy Saving Tips, Maintenance And Cleaning, Troubleshooting Guide, E3 - E6, E7 - E8