Spring
Spread to Install
against housing

Checking Controls

Turn the camera on and operate each of the housing controls to get a feel for using the camera in the housing. Take a few pictures above water with the camera in the housing.

6

Diffuser & Deflector Installation

Deflector

Housing shown with

Deflector installed.

Lubricants

1. Ikelite provides silicone lubricant with the housing. We recommend you use only Ikelite lubricant on Ikelite products as some other brands may cause the o’ring to swell and not seal properly.

2. Use only enough lubricant to lightly cover control shafts and o’rings. Wipe off any excess lubricant with a clean cloth. Lubricant is not a sealant, it is used to reduce friction. Excessive lubricant can collect sand and dirt which may interfere with proper sealing.

CAUTION

Never use spray lubricants as the propellant ingredient can cause the plastic housing to crack.

7

Diffuser and Deflector cont.

Deflector

A diffuser and deflector are

 

Diffuser/

 

material

included with the housing. The

 

diffuser is white transparent

 

plastic. The deflector is also

 

 

white but is not transparent

 

and has a decal on the front.

 

To install the diffuser or

This edge

Port Clamp

 

 

deflector spread the port clamp at the spring end

and slide over the lens port. The white plastic should be placed in front of the camera flash. The port clamp should be pushed back against the front of the housing.

Diffuser

The diffuser should be installed when using the camera’s built in flash. When shooting with the camera’s built-in flash at approximately 2 feet (0.6 m) or less, the lens port on the housing may block a portion of the light from the camera’s built-in flash, creating a shadow in the lower left of the photo. If this occurs, zoom the lens slightly to eliminate the shadow. (You can test this above water)

Deflector

The deflector should be installed when using an external strobe such as the DS51 or DS125 Substrobe and EV Controller. The deflector will redirect the camera’s flash to the EV Controller which controls the external strobes output.

8

9

Page 2 Page 4
Page 3
Image 3
Ikelite DSC-W5, DSC-W7 Checking Controls, Diffuser & Deflector Installation, Lubricants, Diffuser and Deflector
Page 2 Page 4

DSC-W7, DSC-W5 specifications

The Ikelite DSC-W5 and DSC-W7 are well-regarded underwater camera housings designed specifically for the Sony Cyber-shot series, particularly the DSC-W5 and DSC-W7 models. These housings allow photographers to explore underwater environments while effectively protecting their cameras from water damage.

One of the standout features of the Ikelite housings is their robust construction. Made from durable materials, the housings ensure excellent performance and longevity in challenging underwater conditions. The clear polycarbonate design allows users to easily monitor camera controls and view the camera's LCD screen while diving.

Both the DSC-W5 and DSC-W7 models are equipped with high-resolution sensors, enabling sharp and vibrant image capture. The Ikelite housings maximize the potential of these sensors by offering precise controls that allow users to adjust settings without removing the camera from the housing. This feature is particularly valuable for underwater photography, where lighting conditions can vary dramatically.

The Ikelite housings also include user-friendly controls that align with the camera's buttons, allowing photographers to utilize functions such as zoom and settings adjustments with ease. Additionally, the housings feature an array of threaded ports, accommodating various accessories such as external strobes and wide-angle lenses, further enhancing the creative possibilities for photographers.

One of the critical technologies integrated into the Ikelite DSC-W5 and DSC-W7 housings is a waterproof rating. These housings are typically rated to depths of up to 200 feet, making them suitable for both novice and experienced divers. This depth rating, paired with the camera's built-in image stabilization, provides a solid foundation for capturing stunning underwater scenes, even in challenging conditions.

Furthermore, the Ikelite housing design ensures easy access to the camera's battery and memory card without needing to remove it from the housing, minimizing interruptions during dives. The ergonomic design of the housing makes it comfortable to hold, even while wearing gloves.

In conclusion, the Ikelite DSC-W5 and DSC-W7 underwater housings are essential tools for enthusiasts looking to capture stunning underwater photography. Their robust construction, user-friendly controls, waterproof capabilities, and accessory compatibility make them a favorite among divers and photographers alike. With these robust housings, users can unlock the full potential of their Sony Cyber-shot cameras and capture the beauty of the underwater world with confidence.
Top Page Image Contents