Ikelite DSC-W90 instruction manual Please Read If Using an EV-Controller

Lid

Hook

O' Ring

Mounting Bolt

CAMERA / MOUNT

Mounting Tray

Lift

Lid Snap Lock

Push Forward

Ikelite Digital Housing

inst ructi on ma nual

#6114.90 Housing for Sony DSC-W90 Camera

Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 40 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.

The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory. Housing is pressure tested to 200’ (60m).

Power

Shutter

Release

Lid	Lens	Lid
Snap		Snap
	Port

Front View

Zoom

Thumb

Rest

Playback
Menu
	Lanyard
	Mode
3	Control
	Button
Back View

Please Read

We suggest that you read this instruction booklet thoroughly before use. If you are new to underwater photography be sure to read the General and Photo Tips.

We also suggest that you read the camera manual thoroughly to have a full understanding of where each camera control is located and what function each control provides.

Please Read If Using an EV-Controller

The EV-Controller used with Ikelite DS Substrobes have two user settings. One setting is for strobe selection, the other is for pre-flash or non pre-flash. This camera uses pre-flash, thus the EV-Controller should be set to the pre-flash position when used with this camera.

2

Opening the Housing 1. Lid Snaps have a Lock.

To open, push Lid Snap Lock forward and lift as shown.

Keep pressure on the Lid Snap so it does not fly open quickly.

Some lid snaps have a lot of spring tension once they go over center, have a firm grip on the lid snap. Lid Snaps may be opened one at a time.

Installing the Camera Remove the back from the housing. The mounting tray

for the camera is secured to the

housing back.

Position the camera on the tray and

secure it with the mounting bolt which

threads into the camera’s tripod

socket.

CAUTION:

Some camera tripod socket threads are plastic. The mounting tray bolt is metal. Do not cross thread or over tighten as you may damage the camera tripod socket threads.

4