LCD Display After Alarms are Set
The above image shows alarm 1 set to sound to the buzzer, and alarm 2 set to sound to a docked iPod.
LCD Display During Setting of Alarm
The above image shows alarm 2 is being set to sound to the AM radio. The time will blink dur- ing the setting of the alarm.
alarm
Setting the Alarms
1Press and hold the AL1 (Alarm 1) or AL2 (Alarm 2) button.
2While holding the AL1 or AL2 button, press the HR/MIN buttons on the top of the clock radio to adjust the hour and the minute of the alarm.
3While continuing to hold the AL1 or AL2 button, press the SOURCE button to adjust the alarm source. Buzz - Wake to Buzzer
Tune FM - Wake to the FM radio Tune AM - Wake to the AM radio iPod - Wake to a docked iPod
4Release the AL1 or AL2 button to finish setting the alarm.
To cancel the alarm, press the AL1 or AL2 button twice. The alarm source icon on the display will disappear.
When the Alarm Sounds
When the Alarm Sounds, you can either turn the alarm off until the set alarm time is reached again, or you can press the SNOOZE button to delay the alarm for an additional 9 minutes.
CUSTOMER HELPLINE | iLive IC600B 11 |
