Docking an iPod or iPhone
Step 1: Locate the numbered bracket that fits the iPod or iPhone that will be docked.
•Each included bracket has a number on it, indicating which iPod or iPhone model that bracket is compatible with. See the separate bracket chart page toidentify which bracket is needed.
Step 2: Snap the bracket into place over the iPod/iPhone connector in the docking station.
• All brackets will only fit one way onto the dock.
Step 3: Connect the iPod or iPhone to the iPod/iPhone connector inside the docking station.
•Once an iPod or iPhone is connected to the docking station, the unit will amplify and charge the docked iPod or iPhone.
•If the unit is running on battery power, it will not charge a docked iPod or iPhone.
Playing a docked iPod or iPhone
Step 1: Dock an iPod or iPhone into the docking station.
Step 2: Press the Power/Alarm Off Button to turn the unit on.
Step 3: Adjust the Source Button to switch to iPod Mode.
Step 4: Press the Play/Pause Button to play or pause the docked iPod.
Setting the Time
Step 1: Press the Power/Alarm Off Button to turn the unit off.
Step 2: Press and hold the Time/Menu Button.
Step 3: While holding the Time/Menu Button, press the Up/Hour & Down/ Minute Buttons to adjust the hour and minute.
Step 4: Release the Time/Menu Button to set the adjusted time.
6
