Copyright ©2005 by ILY Enterprise Inc.

All Rights Reserved.

4

Chapter 1 Introduction

1.1 Overview

People who want to create multiple copies of their CDs usually take a long time to do so. They
might not have enough CD+RW drives or they might be using their computers for some other
important tasks. The duplication process noticeably slows down a computer during the burn
process. Rather than sit at the computer for hours duplicating discs one at a time, it is much more
efficient to use a CoolCopy CD duplication system.
The Coolcopy CD Duplicator system is a standalone duplicator and does not need to be
connected to a computer. It can duplicate discs accurately and quickly. With its multi-function
LCD panel, Coolcopy CD Duplicator is easy for any user to operate. It is a cost-efficient CD-R
duplicator for audio, data, and video applications. The simple control panel is designed to provide
copy mode selection and copy operation.

1.2 Features

• Standalone IDE to IDE CD Copy controller
• 2(Coolcopy1AL(CD-Backup)) / 4(Coolcopy3) / 8(Coolcopy7) / 16(Coolcopy14)
independent IDE channel
• Self system diagnostics when power on
• Supports Hard Drive image
• Auto format detection
• User friendly interface with message rich LCD display
• Fast copies supports high speed CD-RW writing mode
• Easy operation without software and training are required
• Firmware upgrade via CD-ROM

1.3 Specification

Power requirement – voltage: 5VB+/- 5%
Current: 0.5A Max.
Environment - Temperature
Operating 0˚ C to 70˚ C
Storage -20˚ C to 85˚ C
Humidity - 15% to 90%
Models: Coolcopy3/coolcopy7
Dimensions - Length: 200 mm
Width: 146.2 mm
Height: 42 mm
Connectors - 40-pin internal IDE connector
Cable (Optional) - Using ATA-66 (*Cable of length do not use longer than 46cm)
CD Format - CD-ROM (Mode1 & Mode2), CD-ROM/XA (Mode2 form1 & form2), CD-DA,
Mixed-Mode, Video CD, CD-I, Karaoke CD, Photo CD (Single & Multi-
session), CD-Extra, HFS, CD Bridge, ISO9660, CD-R, and CD-RW
Writing mode - Auto Detect (DAO, TAO)