Tighten all Nylon Locknuts used in steps

6.Press a 60mm Square Inner Cap (28) into the Left Frame (12). Attach the Left Frame to the left Uprights (7, 8) using four M10 x 78mm Bolts (31) and four M10 Nylon Locknuts (29). Do not tighten the Nylon Locknuts yet.

Assemble the Right Frame (10) on the right Uprights (7, 8) in the same manner.

Attach the Center Frame (11) to the Left Frame (12) and the Right Frame (10) using four M10 x 78mm Bolts (31) and four M10 Nylon Locknuts (29).

Tighten all Nylon Locknuts used in steps 1–6.

7.Press the two 51mm Round Inner Caps (42) into the weight tubes on the Weight Carriage (15).

Make sure the Weight Carriage is turned so the weight tubes are near the top, as shown. Attach the lower Carriage Bushing (16) to the Weight Carriage (15) using a M10 x 66mm Bolt (35), two M10 Washers (37), the 51mm Spacer (39), and a M10 Nylon Locknut (29).

8.Insert the two Weight Guides (9) into the Weight Guide Base (4). Attach the Weight Guides using two M8 x 72mm Bolts (33), four M8 Washers (36), and two M8 Nylon Locknuts (30).

Slide the two Weight Bumpers (18) and the Weight Carriage (15) over the Weight Guides (9). Be sure the Weight Bumpers are on the bottom.

9.Press a 60mm Square Inner Cap (28) into the end of the Weight Guide Frame (14).

Hold the Weight Guide Frame (14) on top of the Center Frame (11) and the Weight Guides (9). Attach the Weight Guides to the Weight Guide Frame using two M8 x 72mm Bolts (33), four M8 Washers (36), and two M8 Nylon Locknuts (30).

Attach the Weight Guide Frame (14) to the Center Frame (11) using two M10 x 78mm Bolts (31), two M10 Washers (37), and two M10 Nylon Locknuts (29).

6			11
			11
	10	29
	10
				29
				28
	31	8	31
	31		12
			12	29
		31		29
	7	31
	7
			31	8
				8
		7	29
			29
7	42
			15

Weight Tube

	29
	37			42
	37
	16	39	37	35
		39	37	35
8				9
				9
				15
		30		18
				18
				4
				36
				33
9	30	36		28
9

	31			36
				36
	14			33
				33
		11
				9
	37
	29

Image IMBE39401 user manual Tighten all Nylon Locknuts used in steps

Models: IMBE39401

Tighten all Nylon Locknuts used in steps 1–6.

	29
	37			42
	37
	16	39	37	35
		39	37	35
8				9
				9
				15
		30		18
				18
				4
				36
				33
9	30	36		28
9

	31			36
				36
	14			33
				33
		11
				9
	37
	29

	29
	37			42
	37
	16	39	37	35
		39	37	35
8				9
				9
				15
		30		18
				18
				4
				36
				33
9	30	36		28
9

	31			36
				36
	14			33
				33
		11
				9
	37
	29

	29
	37			42
	37
	16	39	37	35
		39	37	35
8				9
				9
				15
		30		18
				18
				4
				36
				33
9	30	36		28
9

	31			36
				36
	14			33
				33
		11
				9
	37
	29