Adjusting the Weight Bench

24.Attach the Curl Pad (8) to the Curl Upright (9) with two M6 x 16mm Screws (3).

25.Make sure all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTING THE WEIGHT BENCH starting on the following page.

This section explains how the weight bench can be adjusted. See the included exercise guide for important information about how to perform a variety of exercises and how to get the greatest benefit from your exercise program. Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.

USING THE LOCKING BAR AND SAFETY SPOTTERS

Before starting an exercise, position the Barbell (63) and the Safety Spotters (56, 57) in the correct position for that exercise.

To do this, stand in front of the cage and grip the Locking Bar (62) with both hands. Turn the Locking Bar until the two hooks disengage the slots in the Uprights (43). Move the Locking Bar to a new position and turn the Locking Bar until the hooks engage the slots in the Uprights.

Note: Always start an exercise with the Barbell posi- tioned at the lowest point to which it will move during the exercise.

Position both Safety Spotters (56, 57) directly under the Weight Gliders (59, 60).

USING THE SAFETY SPOTTERS

To move a Safety Spotter (56, 57) to a new position, grip the handle on one side of the Spotter Hook (49, 45 [not shown]) and pull the Spotter Hook out of the slot in the Upright (43). Raise or lower the Safety Spotter to a new position and turn the Spotter Hook until it engages one of the slots in the Upright.

WARNING: Always set both Safety Spotters (56, 57) at the same height.

		43
		43
	59
	56	62
		62
		63
		60
		57
		43
	56	49
	56	Handle
		Handle

IMBE53901 specifications

IMBE53901 is a cutting-edge image processing module that has garnered attention in various sectors, including healthcare, automotive, and security. Designed for high-performance applications, this module combines state-of-the-art technologies to deliver superior image quality and real-time processing capabilities.

One of the standout features of IMBE53901 is its advanced image sensor technology. Built with a high-resolution CMOS sensor, the module captures detailed images with exceptional clarity. This technology reduces noise and enhances color accuracy, making it ideal for applications where precision is paramount, such as medical imaging and surveillance.

The module is equipped with powerful image signal processing algorithms that optimize image quality in real time. These algorithms include features such as dynamic range optimization, noise reduction, and color correction. This ensures that the images produced are not only clear but also representative of real-life colors and details, which is crucial for diagnostic imaging and security monitoring.

Another key characteristic of IMBE53901 is its versatility in connectivity options. The module supports various protocols, including USB, Ethernet, and wireless connectivity, making it easy to integrate into existing systems. This flexibility allows developers to implement the module in diverse environments, whether it be in standalone devices or as part of a larger network.

Moreover, IMBE53901 is designed with efficiency in mind. It features low power consumption technology, which is particularly important for battery-operated devices or applications where energy efficiency is critical. This capability ensures that the module can perform high-level processing without draining power resources, extending the lifespan of the devices it is integrated into.

The compact design of the IMBE53901 also contributes to its appeal. Despite its robust capabilities, the module is lightweight and can be easily embedded in a variety of devices. This makes it an excellent choice for manufacturers looking to add advanced imaging capabilities to their products without compromising on space or weight.

In summary, IMBE53901 stands out as a leading image processing module that combines high-resolution imaging, advanced processing algorithms, versatile connectivity, energy efficiency, and a compact design. These features make it an appealing solution for industries seeking to enhance their imaging applications, ensuring they remain at the forefront of technology.

Image IMBE53901 user manual Adjusting the Weight Bench, Using the Locking BAR and Safety Spotters

Models: IMBE53901