THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is se- lected, the following information will appear in the dis- play:
The upper part of
the display will show the number of thousands of
steps taken by all
users of the treadmill. The center of the dis-
play will show the
total number of miles or kilometers that the walking belt has moved. The lower part of the display will show the
total number of hours that the treadmill has been oper- ated. In addition, an “E” for English miles or an “M” for metric kilometers will appear in the lower part of the dis- play. To change the unit of measurement, press the Speed increase button.
IMPORTANT: If a “d” appears in the display, the con- sole is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automati- cally appear in a preset sequence, although the but- tons on the console will not operate. If a “d” appears when the information mode is selected, press the Speed decrease button so “d” disappears.
To exit the information mode, remove the key from the console.
19
