Impex CB-349 manual Diagram

STEP 4 (SEE DIAGRAM 4)

A.) Attach the hole-side of the Backrest Supports (#16) onto both ends of the Pivot on the Main Seat Support (#52) and place the other side rest against the Backrest Adjustment

Bar (#10).

B.) Place the Backrest Board (#18) onto the Backrest Supports (#16). Secure it with four M6

	x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51).
C.)	Place Seat (#19) onto the bracket on the Main Seat Support (#52). Align the holes and
	secure the Seat with four M6 x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51).
D.)	Insert the Arm Curl Stand (#22) into the opening on the top of the Front Stabilizer (#42).
	Secure it with a Knob Bolt (#47).
E.)	Attach the Arm Curl Pad (#23) to the Arm Curl Stand (#22). Secure it with two M8 x 5/8”
	Hex Bolts (#20) and ∅ 5/8” Washers (#21).
	DIAGRAM 4

7