CARE, MAINTENANCE AND STORAGE

1.Inspect and tighten all parts each time you use the bike. Replace any worn parts immediately.

2.The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.

3.Store the bike IN-DOOR. Excess moisture and water would cause rust on the frame.

4.The Bike shall be placed at least 24 inches away from the wall or/and any other object such as furniture to provide safe access to and passage around the bike.

5.To avoid possible injury, the help of two or more people are needed when moving the bike around.

6.Disposal Instructions – The equipment can be safely disassembled and disposed without unreasonable hazards. Call your local recycle agency regarding details of recycling.

7.The maximum user weight is 300 lbs.

8.Assembled Dimension: 51” x 20” x 41”

OPERATING NOTES

ADJUSTMENT

1.Use the Tension Adjustment Knob (#10) to adjust the resistance for exercise.

2.The seat height adjustment is in approximately 1” increment.

*The seat height can be adjusted for 6 different height ranges from 36” to 41”.

3.Loosen and pull out the Lock Knob (#11). Slide the Seat/ Seat Post/ Handle bar to the desired position on the Seat Post, Seat Support, Handle Post, and then release the Lock Knob and securely fasten the Knob to lock the Seat Post, Seat Support, and Handle Post.

Stopping the Exercise

1.Press down on the Brake Handle to stop the fly wheel. ONLY when the flywheel has stopped, will it be safe to remove feet from pedals.\

2.DO NOT stop pedaling: doing so could result in serious injury.

3.DO NOT attempt to stop the Fly Wheel by hands, feet or any other device not indicated in this instruction.

TRANSPORT

The Bike has a pair Roller Wheels on Front Stabilizer.

To move, carefully tilt the cycle forward, and then roll.

© IMPEX INC.

10

Page 11
Image 11
Impex H2502C manual CARE, Maintenance and Storage, Operating Notes