ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench

NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Attach the Rear Stabilizer (#33) and the Base Frame (#45) to the Main Stabilizer (#35). Secure them with two M12 x 4” Carriage Bolts (#38), 1” Washers (#12) and M12 Aircraft Nuts (#13).

B.) Attach the Rear Vertical Beam (#19) to the Rear Stabilizer (#33). Secure it with two M12 x 1” Allen Bolts (#29) and 1” Washers (#12).

C.) Attach the Front Vertical Beam (#22) to the Base Frame (#45). Secure it with two M12 x 4” Carriage Bolts (#38), 1” Washers (#12), and M12 Aircrafts (#13).

D.) Attach the Seat Frame (#53) to the Base Frame (#45). Secure it with three M12 x 1’ Allen Bolts (#29) and 1” Washers (#12).

4

Page 5
Image 5
Impex IGS-07 manual Assembly Instruction