Impex MCB-347 manual Diagram, Assembly Instruction

ASSEMBLY INSTRUCTION

Tools required assembling the machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (SEE DIAGRAM 1)

A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#2) in the Mid-span. Secure each end of Cross Brace with two M10 x 3 1/8” Hex Bolts (#40), four ∅ ¾” Washers (#48), one Bracket (#17), and two M10 Aircraft Nuts (#51).

B.) Insert the Backrest Adjustment Bar (#9) through a selected hole to obtain desired incline of Backrest.

C.) Insert Left & Right Bar Catches (#11) & (#12) into the selected holes on the Rear Upright Beams to obtain the desired height to hold the weight bar.

DIAGRAM 1

5