Impex MCB-5693 manual Assembly Instruction

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.

NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Plug four 2 ¾” x 2” End Cap (#21) onto the Left and Right Upright Beams (#1) & (#2).

B.) Connect the Left and Right Upright Beams with a Cross Brace (#3) in the mid-span. Secure each end of the Cross Brace with two M10 x 2 ¾” Carriage Bolts (#42), one 4 ¾” x 2 ¾” Bracket (#17), two Ø ¾” Washers (#39), and two M10 Aircraft Nuts (#50).

C.) Place the Backrest Adjustment Bar (#8) onto the selected slot on the Upright Beams to obtain desired backrest incline.

D.) Insert the two Crutches (#7) into the two Upright Beams. Use the Lock Knob (#26) to lock the Crutch in desired position.

DIAGRAM 1