Impex MP-PWR10.0 manual Diagram

STEP 2 (See Diagram 2)

A.) Attach the two side-holes on bottom of Backrest Supports (#30) to the pivot on the Main Frame (#27). Secure it with one M12 x 5 ¾” Allen Bolt (#75), two Ø 1” Washers (#68), and one M12 Aircraft Nut (#71).

B.) Align the pivot on top of Backrest Incline Support (#31) to the middle side-holes in between the Backrest Supports. Secure it with one M12 x 5 ¾” Allen Bolt (#75), two Ø 1” Washers (#68), and one M12 Aircraft Nut (#71).

C.) Attach the Backrest Board (#36) onto the Backrest Supports and secure it with four M8 x 1 5/8” Allen Bolts (#83) and Ø 5/8” Washers (#70).

D.) Place the Seat Pad (#35) onto the Main Frame. Secure it with four M8 x 1 5/8” Allen Bolts (#83) and Ø 5/8” Washers (#70).

DIAGRAM 2

7