Impex MSS-7500 manual Assembly Instruction, See Diagram

ASSEMBLY INSTRUCTION

Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended for two or more people to assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Do not tighten the Nuts and Bolts until instructed to do so.

B.) Connect the two Upright Beams (#1) by a Cross Brace (#2) in the mid-span. Secure each end of the Cross Brace to Upright Beam with two M10 x 3 ¾” Carriage Bolts (#30), one 5 ½” Curved Bracket (#13), two Ø ¾” Washers (#36), and two M10 Aircraft Nuts (#38).

C.) Insert two Crutches (#7) into the openings on the two Upright Beams. Thread a M18 Lock Knob (#16) into the Upright Beam to lock each Crutch at desired height.

D.) Place the Backrest Adjustment Bar (#8) onto the selected peg to obtain the backrest incline.

DIAGRAM 1

6