ASSEMBLY INSTRUCTION

Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left and Right Upright Beams (#1) & (#2) by a Cross Brace (#4) in the mid- span. Align the holes and secure them with one Bracket (#23), two M10 x 3 1/8” Carriage Bolts (#39), two ¾” Washers (#50), and M10 Aircraft Nuts (#49) on each end of the Cross Brace.

B.) Place Backrest Adjustment Bar (#12) between the two Upright Beams on the selected bar holder to obtain desired incline of Backrest.

C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with two Lock Knobs (#37) through selected holes to obtain desired height of the Supports.

D.) Insert the Left and Right Safety Hooks (#53) & (#54) into the holes on the Crutches (#7). Secure them with two M8 Aircraft Nuts (#38).

E.) Attach a Weight Plate Holder (#14) onto the back of the Left Upright Beam (#1). Secure it with a M10 x 1” Allen Bolt (#55) and 3/4” Washer (#50). Push a Rubber Bumper (#20)

onto the Holder (#14). Repeat the step to install the other side. DIAGRAM 1

4

Page 5
Image 5
Impex MWB 758 manual Assembly Instruction