COMPUTER
DETAIL OF OPERATION:
SET CLOCK:
Once the batteries are installed, the Hour digit starts flashing. Press UP or DOWN button to set the hour and then press ENTER. After the Hour is set, the Minute digit starts flashing. Press UP or DOWN button to set the minute then press ENTER.
Note: If you made a mistake or would like to
AUTO START / STOP
When exercise starts, the monitor will automatically turn on and display the progress. When exercise stops, the monitor will automatically turn off (after 4 minutes) to save energy. During the off mode, the Clock and Temperature will display.
DISPLAY: |
|
Temperature | Display room temperature when the unit is not in use. |
Speed | Display the current speed in Mile per Hour. |
Speed Zone | Display the progress of speed. |
Distance | Display the distance traveled in Miles. |
Time | Display the elapsed time. |
Calories | Display the calorie consumption. |
REPLACE BATTERY:
1.Remove the battery cover on the back of the computer.
2.Replace two 1.5V (AA) batteries.
3.Make sure the batteries are installed correctly and the polarities are correct.
4.If the display is not clear or only partial segments appeared, remove the batteries and wait for 15 seconds before
5.The battery life is approx. 3 months under normal usage.
6.When the batteries are removed, all functional values will reset to zero.
12
