STEP 4 (See Diagram 4)
A.) | Place the Headrest Board (#17) onto the Headrest Bracket (#12). Secure it with two M8 |
| x ¾” Allen Bolts (#43) and ∅ 5/8” Washers (#46). |
B.) | Place the Backrest Board (#18) onto the Backrest Supports (#5). Secure it with four M6 |
| x 1 3/8” Hex Bolts (#39) and ∅ ½” Washers (#45). |
C.) | Place the Seat Pad (#19) onto the Seat Bracket (#9). Secure it with four M8 x 5/8” Allen |
| Bolts (#40) and ∅ 5/8” Washers (#46). Insert a |
| hole on the Seat Bracket (#9) to obtain the desired incline of the Seat. |
D.) | Attach the Arm Curl Pad (#52) to the Arm Curl Stand (#14). Secure it with two M8 x 5/8” |
| Allen Bolts (#40) and ∅ 5/8” Washers (#46). Insert the Stand into the holder behind the |
| Right Upright Beam. For Arm Curl exercises, remove the Leg Developer and Insert the |
| Arm Curl Stand into the opening on the Front Stabilizer. |
| DIAGRAM 4 |
7
