STEP 3 (See Diagram 3)
A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting Sleeve (#9) in between the two Sliding Bar Catches (#5). Align the holes. Insert the Weight Bar (#10) into the Bar Catch from one end and through the Lifting Sleeve to the other Bar Catch on the opposite end. Center the Weight Bar and secure it to each Bar Catch with one M10 x 5/8” Allen Bolt (#43).
B.) Turn the hook on the Lifting Sleeve into the selected holes on the Upright Beams to secure the Weight Bar position.
C.) Slide a Ø 3” Rubber Spacer (#19) onto the Weight Bar. Push one Olympic Sleeve (#22) onto the Weight Bar. Secure the Olympic Sleeve with a M8 x ½” Allen Screw
(#14). Attach a Spring Clip (#15) onto the Sleeve. D.) Repeat Step C above to install the other side.
DIAGRAM 3
6
