Impex SM-6001 manual Diagram

STEP 3 (See Diagram 3)

A.) Align the bracket on the Backrest Adjustment Support (#9) in between the two Backrest Supports (#4). Secure it with four M8 x 1 5/8” Allen Bolts (#37), eight Ø 5/8” Washers (#32), and four M8 Aircraft Nuts (#34). Do not tighten the Nuts and Bolts yet.

B.) Insert the Backrest Adjustment Support (#9) into the opening on the Main Frame (#1). Press or step down on the Backrest Adjustment Lever (#10) to allow the Support to go through.

C.) Attach the bottom side-holes on the Backrest Supports (#4) to the pivot on the Main Frame. Secure it with one M10 x 6 ½” Allen Bolt (#40), two Ø ¾” Washers (#33), and one M10 Aircraft Nut (#35).

D.) Securely tighten all Nuts and Bolts installed.

DIAGRAM 3

24