ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches, two Allen
Wrenches, and one Philips Screwdriver. NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) | Connect two Lower Guide Rods (23) and two Upper Guide Rods (#24) with two M10 |
| Stud Bolts (#80). Firmly thread the Rods together. |
B.) | Insert the Lower Guide Rods (#23) into the holes on the Rear Base Frame (#2). |
| Secure it with two M10 x 1” Allen Bolts (#73) and Ø ¾” Washers (#83) from the |
| bottom. |
C.) | Attach the Main Base Frame (#8) to the Rear Base Frame (#2). Secure it with two M10 |
| x 2 ½” Carriage Bolts (#79), one 4” Bracket (#30), two Ø ¾” Washers (#83), and two |
| M10 Aircraft Nuts (#85). |
D.) | NOTE: Do not tighten all the Nuts and Bolts until instructed to do so. |
E.) | Attach the Lower Vertical Frame (#3) onto the Main Base Frame (#8). Secure it with |
| two M10 x 2 ½” Carriage Bolts (#79), one 4 ¾” Bracket (#29), two Ø ¾” Washers |
| (#83), and two M10 Aircraft Nuts (#85). |
F.) | Attach the Leg Developer Holder (#1) to the Main Base Frame (#8) and Front Base |
| Plate (#15). Secure them together with two M10 x 2 ½” Carriage Bolts (#79), one 4 ¾” |
| Bracket (#29), two Ø ¾” Washers (#83), and two M10 Aircraft Nuts (#85). |
G.) | Attach the Seat Support (#16) to the Leg Developer Holder (#1). Secure it with one |
| M10 x 2 3/8” Allen Bolt (#71), two Ø ¾” Washers (#83), and one M10 Aircraft Nut |
| (#85). |
H.) | Attach the Seat Support (#16) to the Lower Vertical Frame (#3). Secure it with two M10 |
| x 2 ½” Carriage Bolts (#79), one 4 ¾” Bracket (#29), two Ø ¾” Washers (#83), and two |
| M10 Aircraft Nuts (#85). |
I.) | Attach the Upper Vertical Frame (#14) to the Lower Vertical Frame (#3). Secure them |
| with four M10 x 2 ½” Carriage Bolts (#79), two |
| Washers (#83), and four M10 Aircraft Nuts (#85). |
J.) | Attach the Stopper Frame (#25) to the Upper Vertical Frame (#14). Secure it with one |
| M10 x 2 3/8” Allen Bolt (#71) and Ø ¾” Washer (#83). |
7
