Impex WM-348.1 manual Step See Diagram

STEP 4		(SEE DIAGRAM 4)
A.)	Attach the hole-side of the Backrest Supports (#60) onto both ends of the Pivot on the
	Main Seat Support (#52). The other side rest against the Backrest Adjustment Bar
	(#10).
B.)	Place the Backrest Board (#18) onto the Backrest Supports (#60). Secure it with four
	M6 x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51).
C.)	Place Seat (#19) onto the bracket on the Main Seat Support (#52). Align the holes and
	secure the Seat with four M6 x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51).
D.)	Insert the Arm Curl Stand (#22) into the opening on the top of the Front Stabilizer (#42).
	Secure it with a Knob Bolt (#47).
E.)	Attach the Arm Curl Pad (#23) to the Arm Curl Stand (#22). Secure it with two M8 x 5/8”
	Hex Bolts (#20) and ∅ 5/8” Washers (#21).

DIAGRAM 4

7