TrimMaster 18™ Finish Nailer Operation
Operation: |
|
|
P |
|
|
80 | 100 | 120 |
➔ |
|
|
PRESS WORK – CONTACTING ELEMENT AGAINST THE WORK SURFACE.
Fan motor starts, fuel is injected into combustion chamber and mixed with air by the fan.
Turn adjustment wheel in either direction
|
|
|
| SQUEEZE |
P |
|
|
| TRIGGER |
|
|
| Spark plug ignites | |
|
|
| the fuel/air mixture | |
|
|
|
| driving the piston |
|
|
|
| assembly down on |
|
|
|
| the fastener. |
80 | 100 |
| 120 |
|
|
|
|
| RELEASE |
|
|
|
| TRIGGER - |
P |
|
|
| LIFT TOOL |
|
|
| Combustion | |
|
|
| chamber opens. | |
|
|
|
| Fan exhausts hot |
|
|
|
| gases and cools |
|
|
|
| internal |
➔ | 80 | 100 | 120 | components. |
|
|
| ||
|
|
|
|
Depth of Drive Adjustment
Remove the battery before adjusting the depth of drive.
The depth of drive adjustment is done by turning the adjustment wheel as shown by the arrows on the side of the tool.
DANGER
The work contacting element and nose will become hot after prolonged or rapid use. If it becomes necessary to adjust the work contacting element, avoid touching with bare hands.
CAUTION
This tool must be operated in a well ventilated environment, because the tool exhausts carbon monoxide similar to a chainsaw or lawn mower. Exposure to carbon monoxide may cause dizziness, nausea or unconsciousness.
NOTE: Altitude Restriction
Impulse® technology is powered by an internal combustion engine and are effected by altitude. The tool may lose power or not cycle consistently at elevations of 4000 feet or greater. When using the tool at elevations of 4000 feet it is recommended to use the blue high altitude fuel metering valve part #219247.
13
