Cleaning and Special Maintenance
Before cleaning the refrigerator, disconnect it from the electrical mains (by removing the plug from the socket or by turning off the main electricity switch for the apartment or house).
-The materials used to build your appliance are hygienic and do not transmit odors. However, to preserve this quality of your appliance, the food stored in it must be well closed and covered to prevent spills which could stain it and cause unpleasant odors.
-Only water and baking soda. To clean both the interior and exterior, use a sponge with warm water and baking soda, which is, among other things, a good disinfectant. If you do not have any in the house, you can use a neutral soap.
-What not to use. Never use abrasives, bleach or ammonia. Solvents and similar products are strictly prohibited.
-All the removable part should be taken out and allowed to soak in hot water and dishwashing soap. Rinse and dry them well before putting them back in the refrigerator.
-And the back? This is where dust builds up, causing prob- lems with the appliance. Use a long adapter on your vacuum, at a medium power setting, to remove it. Be delicate!
-When the appliance is not used for a long time. If you decide not to use the appliance (during the summer), it must cleaned and the doors left open to prevent the formation of mold and unpleasant odors.
-How to replace the refrigerator lamp. The lamp is located on the pack part of the thermostat knob box. When replac- ing the lamp, unplug the appliance from the electrical socket, unscrew the burned out lamp and replace it with another following the steps illustrated in figure 5. Make sure that the wattage is not greater than 15W.
Fig. 5
13 | GB |
